96 Blazer Tranny

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

96 Blazer Tranny

Printable Version

Chevrolet Forum >> General Chevrolet Forums >> General Tech >> 96 Blazer Tranny

Page: [1]

Message

<< Older Topic Newer Topic >>

96 Blazer Tranny - 7/9/2008 7:23:23 AM

drmoeder

Posts: 6
Joined: 3/12/2007
Status: offline

I just rebuilt the transmission on my 96 Chevy Blazer. The second gear would slip around 2000 RPM then just rev as if in neutral. So I rebuilt the transmission myself. I followed a transmission rebuild manual to be thorough. The second gear clutch plates were obviously burned up. After reassembly, I test drove it with a little success. The second gear now works all the way to redline but won''''t shift into 3rd now. I checked and topped off the transmission fluid while it was running and hot. Still won''''t shift into 3rd gear. I''''m thinking maybe there''''s a spring I may have overlooked in the valve body? Can someone point me in the right direction? btw the transmission type is 4L60E

< Message edited by drmoeder -- 7/9/2008 7:48:04 AM >