|
shawnvw -> RE: radio reprogram/activation (7/2/2008 12:40:09 PM)
|
Need to change the whole radio....different software\processor Programming these radios is VERY easy When you install the radio, itwill say calibrate on the screen. The dealer simply needs to use the Tech2 and do a radio setup. there will be 2 options for the radio. UQ3 option(premium pioneer speaker package), or UQ4(base speaker package), you''ll find the info on the underside of the spare tire cover in the trunk. once those are set, turn the key off, open the door(to turn off the RAP system), and turn key back on. Calibration will no longer be seen, andthe radio will work. If the sound is too low or too loud(usually can tell by the volume of the chimes), then the dealer needs to program the radio using SPS programming using the Tech2 and TIS2WEB and select the proper speaker package as outlined above.
|
|
|
|