|
shawnvw -> RE: Door locking (5/20/2008 11:39:18 AM)
|
The only way to d\c the lock actuator without pulling the door skin off would be to cut the the at both door modules. You could pull the plug from the door modules, but you would end up setting codes and have a bunch of different things happen. If you pop up the door lock switch from the armrest, (this whole unit is called the drivers door module), there will be a brown connector on the bottom. It'll have a tan wire in position 7, cut this wire, but leave enough wire so you can re-connect it if you want to. That will disable the drivers dor lock actuator. To do the passenger side, pop up the switches from that door, and in the Lt BLue connector, there will be a tan wire in position 7, cut it and now both front doors should not lock or unlock unless you physically lock them.
|
|
|
|