95 S 10 Timing belt

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

95 S 10 Timing belt

Printable Version

Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> S-10 & Blazer >> 95 S 10 Timing belt

Page: [1]

Message

<< Older Topic Newer Topic >>

95 S 10 Timing belt - 5/16/2008 12:23:49 PM

HMiller111

Posts: 2
Joined: 5/16/2008
Status: offline

I have a 1995 S 10 and I need to replace the timing belt. It has a tentioner and I asume it needs to be loosened. My question is if this is spring loaded or do I just loosen the 15mm bolt and then pry it back to tighten. It has alignment marks on the top. I have the new belt and would like to do this my self. Thanks

Post #: 1

RE: 95 S 10 Timing belt - 5/16/2008 2:47:08 PM

EuroGoldLS

Posts: 2105
Joined: 7/12/2007
From: Princeton, NC, USA
Status: offline

Its a fairly involved process on this engine, but the chain guides should loosen with the wrench. I'm not sure about the older vortec, but the 97+ has a combination of spring and nut, so the nut has to be loosened to move the spring out enough to loosen the chain.

_____________________________

PM me for a custom sig or avatar!

Please do not PM me about forum problems!

(in reply to HMiller111)

Post #: 2

RE: 95 S 10 Timing belt - 5/16/2008 3:01:12 PM

HMiller111

Posts: 2
Joined: 5/16/2008
Status: offline

This model has a serpentine belt not a chaine.The tensioner lays on the belt and the bole is on the piece above. It looks like the bolt has to be loosened to move the tensioner.
Thanks Harold

(in reply to EuroGoldLS)

Post #: 3