sister's impala spitting at me

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

sister's impala spitting at me

Printable Version

Chevrolet >> Chevy Cars >> Impala >> sister's impala spitting at me

Page: [1]

Message

<< Older Topic Newer Topic >>

sister's impala spitting at me - 4/30/2008 6:46:08 PM

jcw1500wt

Posts: 26
Joined: 1/7/2008
Status: offline

My sis has a '02 impala 3.8l.. This evenig it started steaming under the hood, Well being the good big bro' that I am, Iwent to check it out. I saw coolant on the right side of the engine, but couldn't find where it's coming. After about a hour of searching I found it Under the alternator running through the tensioner, a little black hose. All I want to know is what kind hose is it and how hard is it to replace.

_____________________________

James C.

Post #: 1

RE: sister's impala steaming - 5/1/2008 4:46:41 PM

jcw1500wt

Posts: 26
Joined: 1/7/2008
Status: offline

_____________________________

James C.

(in reply to jcw1500wt)

Post #: 2

RE: sister's impala steaming - 5/1/2008 4:47:53 PM

jcw1500wt

Posts: 26
Joined: 1/7/2008
Status: offline

please help me help her

_____________________________

James C.

(in reply to jcw1500wt)

Post #: 3

RE: sister's impala steaming - 5/1/2008 5:42:39 PM

shawnvw

Posts: 832
Joined: 1/18/2008
Status: offline

Is it coming from the hose? or from the pipe that the hose attaches to? A lot of these engines have the pipe corrode and break off. They are plastic from the factory and there is a steel replacement available for it. If it snaps off flush with the intake, then it can be a bugger to get it out. You have to use an easy-out to try and remove the broken piece. If it is cooperating, you can get it without removing the intake, but most times you end up pulling the intake off to fix it properly.

(in reply to jcw1500wt)

Post #: 4

RE: sister's impala steaming - 5/1/2008 5:58:59 PM

jcw1500wt

Posts: 26
Joined: 1/7/2008
Status: offline

Thanks shawnvw, It's leaking from the plastic elbow coming from the intake going to the tensioner and yes it broke on both ends.

_____________________________

James C.

(in reply to shawnvw)

Post #: 5

RE: sister's impala steaming - 5/1/2008 6:00:32 PM

jcw1500wt

Posts: 26
Joined: 1/7/2008
Status: offline

I was just told it is a dealer item, I hope they're wrong!

_____________________________

James C.

(in reply to jcw1500wt)

Post #: 6

RE: sister's impala steaming - 5/1/2008 6:02:15 PM

jcw1500wt

Posts: 26
Joined: 1/7/2008
Status: offline

Also is there a specific name for it

_____________________________

James C.

(in reply to jcw1500wt)

Post #: 7

RE: sister's impala steaming - 5/4/2008 10:04:57 AM

jcw1500wt

Posts: 26
Joined: 1/7/2008
Status: offline

Yep, they were wrong. The dealer was trying sell me both pipes for $15.00, went to a local parts store and got both @ $2.37. If you're ever in the triangle area look for ( WALKER AUTO PARTS ). It's found in help section, heater hose fitting #47065.

_____________________________

James C.

(in reply to jcw1500wt)

Post #: 8