bore out 283 to 350

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

bore out 283 to 350

Printable Version

Chevrolet >> General Chevrolet Forums >> General Tech >> bore out 283 to 350

Page: [1]

Message

<< Older Topic Newer Topic >>

bore out 283 to 350 - 4/28/2008 11:29:51 AM

justchilln1424

Posts: 6
Joined: 2/28/2008
Status: offline

Is it possible to bore a 283 to a 350. if not what is the max a 283 can be bored out to.

_____________________________

Sammo The Great

Post #: 1

RE: bore out 283 to 350 - 4/28/2008 6:52:46 PM

313hitman

Posts: 159
Joined: 10/10/2006
Status: offline

why not just get a 350 block from somewhere. 350's are all around and very affordable, it doesnt make sense to bore a 283 out.

_____________________________

in life only death is promised

(in reply to justchilln1424)

Post #: 2

RE: bore out 283 to 350 - 4/29/2008 3:35:52 PM

old dog

Posts: 316
Joined: 12/25/2007
Status: offline

i would not advise it for the small price of a 350 block ,not to mention the cylinder's will be paper thin ,when you take about 1/8 of a inch out of the bore ,this would truly a grenade motor .

_____________________________

william j allison

(in reply to 313hitman)

Post #: 3

RE: bore out 283 to 350 - 5/3/2008 12:52:31 AM

2tallcustomz

Posts: 83
Joined: 3/6/2008
Status: offline

that is true. the most you could bore out a 283 would be 60 over. which would but it at about 300cui. even that is a dangerous thing to do. anymore than that and you are asking for problems

(in reply to old dog)

Post #: 4