all 4 turn signals & turn flasher out, but hazards working fine (Full Version)

Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> S-10 & Blazer

all 4 turn signals & turn flasher out, but hazards working fine


  

Manor_Mullet -> all 4 turn signals & turn flasher out, but hazards working fine (4/28/2008 9:15:45 AM)

All 4 of my turn signals are out. The turn flasher on the dash does not work-- no click or flash.

However, the hazard signals and the hazard flasher works great. They use all the same bulbs, therefore it must be a turn switch failure right?

Is there a way to repair this without buying a whole switch assembly ($157, rockauto.com)?


  

Manor_Mullet -> RE: all 4 turn signals & turn flasher out, but hazards working fine (4/28/2008 11:51:22 AM)

The turn signal fuse was fine.  There was voltage at the turn signal connectors.  I replaced the turn signal flasher relay ($4), and problem solved.


EvansBlue -> RE: all 4 turn signals & turn flasher out, but hazards working fine (4/28/2008 12:13:11 PM)

Congrats! Solved your own problem! lol. I've done that before.....

I was about to recommend changing the flasher.


  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.