engine swap in sonoma

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

engine swap in sonoma

Printable Version

Chevrolet >> Chevy Trucks, Vans & SUV's >> S-10 >> engine swap in sonoma

Page: [1]

Message

<< Older Topic Newer Topic >>

engine swap in sonoma - 4/27/2008 9:14:08 PM

drax

Posts: 4
Joined: 4/23/2008
Status: offline

Im putting a 5.0 out of a caprice in my sonoma- the truck has 212,000 on all the original stuff, but my diff. is going. So i have a caprice full car salvaged and i was thinking of just swaping the enging and diff. to the truck. There is one problem and that is i need a manual trans and i dont know what would work and i think the rear diff out of the caprice would look to wide on the truck. I could use some help finding a shop that could make me a "good" custom drive shaft and info on a what diff if not the caprice might be good.

Post #: 1

RE: engine swap in sonoma - 4/28/2008 8:31:46 AM

drax

Posts: 4
Joined: 4/23/2008
Status: offline

Im going to rebuild the diff and keep my original trans now so that should eliminate most of my problems but i will still need a bell housing to make it bolt together. Any ideas where i could find one?

(in reply to drax)

Post #: 2

RE: engine swap in sonoma - 5/3/2008 7:03:36 PM

old dog

Posts: 88
Joined: 12/25/2007
Status: offline

if it is a 4.3 v-6 i think it will bolt up check the converter nose that pilot's in the crank .

_____________________________

william j allison

(in reply to drax)

Post #: 3