85 K20 Suburban

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

85 K20 Suburban

Printable Version

Chevrolet >> Chevy Trucks, Vans & SUV's >> Suburban >> 85 K20 Suburban

Page: [1]

Message

<< Older Topic Newer Topic >>

85 K20 Suburban - 4/23/2008 12:31:15 PM

99shaunl

Posts: 2
Joined: 4/23/2008
Status: offline

I have an 85 K20 Suburban. While replacing the dip-stick tube I hit the solenoid and arched. Since then, I seem to have no power to ignition, power windows, radio, etc. I do, however, have power to headlights and dome lights. I cannot find any blown fuses in fuse block. I have removed the started and had it tested by both Kragen and Autozone. Both indicate no problems with starter. I have checked wiring from starter and see no visible damage to fusible links. I have continuity between "hot" wires from starter and connector box on firewall behind fuse block. No sound at all comes from the starter when attempting to start. If a fusible link is blown will it be visibly damaged? Will it still show continutity? If ignition bad, is there a way to determine without replacement? Please advise.

Thanks,

Shaun