Rear View Back Up Cameron on NBS Silverado w/factory Nav????

Printable Version

Chevrolet >> Chevy Trucks, Vans & SUV's >> Silverado >> Rear View Back Up Cameron on NBS Silverado w/factory Nav????

Page: [1]

Login Message << Older Topic   Newer Topic >>

Rear View Back Up Cameron on NBS Silverado w/factory Na... - 4/20/2008 6:58:28 AM    biglg Posts: 2166 Joined: 9/3/2006 Status: offline I have installed two kenwood cameras on my two different 2007 Tahoes.  I would like to add a back up camera to my 2007 NBS Silverado.  However, I dont think the kenwood style cameras would work because I dont see a good mounting location.  Has anyone installed a camera on the NBS Silverados?  What camera?  Anyone have a back up camera from the factory?  Pictures of the cameras installed and make/brand of aftermarket cameras would be greatly appreciated.  Thanks in advance. Post #: 1

RE: Rear View Back Up Cameron on NBS Silverado w/factor... - 6/20/2008 10:32:20 AM    Chas1955 Posts: 92 Joined: 1/17/2008 Status: offline I installed a Tahoe Nav.system that was RVC ready. I got a Kenwood CCD2000 & put the camera in a hole I drilled above the bumper. The tail gate & bumper limit your view ,but you can still see very well (Just not up or down) I used the people out of Houston for hook up help. Forgive me I forgot there name,but they were more than helpfull. (in reply to biglg) Post #: 2

RE: Rear View Back Up Cameron on NBS Silverado w/factor... - 6/22/2008 5:59:01 PM    speedy58 Posts: 111 Joined: 3/11/2008 Status: offline i havent did it yet but im putting mine when i get that far in the hole in my recever hitch but not all of them are the same. so if you dont have one like this guess that not work. but im going with the kenwood as well prob same number there as chas1955 but not sure off top of my head right now but they had 2 of them and both were eazy to mount in that hole just gonna have to weld in a lil bracket inside there to mount it on no biggy at all. _____________________________ Heavy Chevy (in reply to Chas1955) Post #: 3

RE: Rear View Back Up Cameron on NBS Silverado w/factor... - 6/23/2008 5:41:39 AM    Chas1955 Posts: 92 Joined: 1/17/2008 Status: offline Speedy I was going to mount my camera where you want to. The problem I ran into was the mount is scrwed to the camera, so you can weld the factory braket on, but then you have to screw the camera to the mount. The problem is the screws come in from the side & there is not enough room to get them started. If you Fab. your own mount and make it stick out of the hitch (wish I had done that) then it would be a snap. (in reply to speedy58) Post #: 4

RE: Rear View Back Up Cameron on NBS Silverado w/factor... - 6/23/2008 10:32:27 AM    Chas1955 Posts: 92 Joined: 1/17/2008 Status: offline   Ok a bad picture of the back of my truck the camera is behind the space between the bumper & tailgate (in reply to Chas1955) Post #: 5

RE: Rear View Back Up Cameron on NBS Silverado w/factor... - 6/23/2008 10:34:03 AM    Chas1955 Posts: 92 Joined: 1/17/2008 Status: offline Camera can be seen just above slit in bumper cover (in reply to Chas1955) Post #: 6

RE: Rear View Back Up Cameron on NBS Silverado w/factor... - 6/23/2008 10:35:10 AM    Chas1955 Posts: 92 Joined: 1/17/2008 Status: offline view I get. I hope this helps you Speedy (in reply to Chas1955) Post #: 7

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Chevy Prices

Chevy Forums
Monte Carlo
Corvette
Camaro

Top 10 Posters
zx1100f1 2429 73shark 2269 evansblue 2188 biglg 2166 engine2 1707 tahoe07 1139 shawnvw 1097 northey87 874 golfer 610 malibumaxxss 598

New Vendors
Sportwing