Bleeding brakes on 1998 S-10 after rear line break...

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

Bleeding brakes on 1998 S-10 after rear line break...

Printable Version

Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> S-10 & Blazer >> Bleeding brakes on 1998 S-10 after rear line break...

Page: [1]

Message

<< Older Topic Newer Topic >>

Bleeding brakes on 1998 S-10 after rear line break... - 4/16/2008 9:24:30 AM

KevinCarter

Posts: 3
Joined: 4/16/2008
Status: offline

Hi,

I am having a brake bleeding problem on an S-10 (1998) 2WD 4.3L. I had the brake line that goes from the Master cylinder to the rear axle blow due to rust. I had no choice but to drive it with only front brakes for a few days and now that the line is replaced we can't get fluid to bleed into the line....I suspected the P-Value but we tried reseting it by opening the front bleed screw and still nothing....

Is there a special procedure for this truck beyond the normal bleed procedure?

Any help is appreciated.

Cheers,

Kevin