what do you think i can run in a 1/4 (Full Version)

Chevrolet Forums >> Brand Review >> Engine & Internal

what do you think i can run in a 1/4

  

SleepysSleeper -> what do you think i can run in a 1/4 (4/14/2008 9:46:19 PM)

i have a 87 jeep comanche pickup that total weight is 2912 lbs. with a 350 from a camaro,

this is how i plan on setting up the 350

~cam(not sure what one yet)
~head work
~edelbrock performer intake
~headers
~holly 600 carb
~the only belt on the motor is going to be from the crank to the alt
~no power steering
~electric water pump
~peter jackson gear drive

and the trans is a th 350 with a shift kit

and i will be running slicks

  
SleepysSleeper -> RE: what do you think i can run in a 1/4 (4/14/2008 9:47:09 PM)

and the gears in the rear will prob be 4.11's or 4.56's

EvansBlue -> RE: what do you think i can run in a 1/4 (4/15/2008 5:46:24 AM)

Sounds like a good rig.

jmack91z28 -> RE: what do you think i can run in a 1/4 (4/16/2008 11:03:31 AM)

Based off the little bit of info and that the suspension is stock i'd say mid to high 14's, best case scenario

74chevy4life -> RE: what do you think i can run in a 1/4 (4/20/2008 10:33:08 PM)

here is a website with a bunch of calculators to help predict times and other things hope it helps

http://www.wallaceracing.com/Calculators.htm

BurninRubber92 -> RE: what do you think i can run in a 1/4 (6/17/2008 7:32:40 AM)

In order to make a more accurate guess, I would need more information. For example: What size heads, what cam, etc.

But, from the info you provided, I would put it at high 13''s with the slicks if you had a PERFECT launch

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.