Rewiring Spark plugs problem 02 blazer s10

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

Rewiring Spark plugs problem 02 blazer s10

Printable Version

Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> S-10 & Blazer >> Rewiring Spark plugs problem 02 blazer s10

Page: [1]

Message

<< Older Topic Newer Topic >>

Rewiring Spark plugs problem 02 blazer s10 - 4/7/2008 5:23:29 PM

rlk3259

Posts: 1
Joined: 4/7/2008
Status: offline

I replaced the cap and rotor, removed the plugs 1 at a time and replaced them at .060 gap and now its not running very good at all, was running better before i did the work. I think I might have got the wires out of order, does anyone have a diagragm for me that i can see, I have no manual, and cant seem to find one on line. Any help will be appreciated. thanks, Rick

Post #: 1

RE: Rewiring Spark plugs problem 02 blazer s10 - 4/8/2008 2:58:07 PM

shawnvw

Posts: 832
Joined: 1/18/2008
Status: offline

I can't find a pic of the distributor, but I did find a firing order. Line up the motor to TDC on the compression stroke for cyl #1. Take the cap off, and where the rotor is pointing, that spot on the cap is 1. Firing order is as follows, 1-6-5-4-3-2. So going in a clockwise direction, where the rotor is pointing is 1, the next one is 6 and so on

(in reply to rlk3259)

Post #: 2

RE: Rewiring Spark plugs problem 02 blazer s10 - 4/8/2008 6:07:05 PM

EuroGoldLS

Posts: 2031
Joined: 7/12/2007
From: Princeton, NC, USA
Status: offline

I have the firing order and the distributor diagram:

EDI ignition
Rear of engine

Distributor Diagram:
--
----(6)--(5)----
---(4)----(1)---
----(2)--(3)----

Engine Diagram:

(6) (5)
(4) (3)
(2) (1)

Just line up the wires with the correct numbers above.

< Message edited by EuroGoldLS -- 4/8/2008 6:09:02 PM >

_____________________________

PM me for a custom sig or avatar!