1990 Suburban axel removal

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

1990 Suburban axel removal

Printable Version

Chevrolet Forums >> Chevy Trucks, Vans & SUV's >> Suburban >> 1990 Suburban axel removal

Page: [1]

Message

<< Older Topic Newer Topic >>

1990 Suburban axel removal - 4/6/2008 2:25:06 PM

mtomanek

Posts: 1
Joined: 4/6/2008
Status: offline

I have a 1990 sub with the limited slip rear end. It developed a leak in a rear wheel seal. I have pulled the diff cover off and can see 2 C clips holdin the split axels in place. How the hell do you get those clips off so I can remove the axels?
Thanks,
Matt

Post #: 1

RE: 1990 Suburban axel removal - 4/7/2008 6:22:58 AM

jljbtm

Posts: 24
Joined: 1/1/2008
Status: offline

There is a small bolt holding the center pin in place, rotate the carrier until u see that bolt, remove it and the large center pin should slide out alowing u to push the axels in one at a time. When u push the axel in the c-clip almost always just falls out.
Reverse to install.

(in reply to mtomanek)

Post #: 2