RE: 98 chevy 1500 4.3 wont start.
Login | |
|
RE: 98 chevy 1500 4.3 wont start. - 4/16/2008 1:44:31 PM
|
|
|
jmack91z28
Posts: 162
Joined: 2/27/2008 Status: offline
|
Theres a ton of things to check when theres a strange problem like this. In my experience it's always been something like clogged fuel filter or a clog in the fuel rail, or a bad computer or chip. Where in the fuel system are you checking for pressure? You said you bought a new computer for it, where did you buy it at, and could it possibly be the chip?
_____________________________
1994 K2500 454 4L80E 14bolt 10.5" w/ 4.10's
|
|
|
|
|
|
|
|
RE: 98 chevy 1500 4.3 wont start. - 4/16/2008 5:04:07 PM
|
|
|
Tuner
Posts: 7
Joined: 4/4/2008 Status: offline
|
I took the fuel pressure at the inlet to the injection system at the factory schrader valve. This was with the schrader valve removed so it could not hold pressure at the gage. It's getting enough fuel to foul the plugs so I think it's a spark problem. The haynes manual says I should see 5V output on the crank sensor and I'm seeing only 2.8. I get the same reading off three crank sensors (the two I tried besides the original were used). I still have to believe the crank sensor is not the problem. Any ideas. Thanks for all the input, You guys are great. Tom
|
|
|
|
|