Ball joints on 94 Caprice classic (Full Version)

Chevrolet Forum >> Past Vehicles >> Caprice

Ball joints on 94 Caprice classic

  

hometheaterman -> Ball joints on 94 Caprice classic (3/30/2008 10:51:22 AM)

Since the upper ball joint is riveted in whats the best way to get the rivets out? Do I just want to take my angle grinder to them and grind the heads off or do I want to try and drill through the middle or what do I want to do to get the rivets out? Thanks guys.

  
shawnvw -> RE: Ball joints on 94 Caprice classic (3/30/2008 12:07:20 PM)

angle grinder will work fine, grind the heads off, pound the ball joint off, grind off the rest of the rivots sticking out, or punch it through if they aren't too stubborn. If you have access to an oxy\acetylene torch, that is much easier than trying the grind the hell outta the rivots

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.