|
shawnvw -> RE: 1999 s-10 rear brake line (3/30/2008 11:57:49 AM)
|
Buy the 1/4 inch line from napa, maybe a connector if you need 2 lines. cut the old line off where you can. Don't try to pull it out of its holder or you may disturb the fuel lines and have a real headache on your hands.
Re-use the metric line ends. If they are all rusted, put them in a vise, cut the old line flush with the top of the nut, drill it out with a 1/4" bit, and take it to the wire wheel. Cut one end off the new line, put on the old nut,(make sure it is right way), and just flare the end of the line to match what you took off. If you don't have a flaring tool, take it to your local shop and have them do it for $10-20.
This is the easiest and cheapest way to do this. Well i guess buy a metric line would be easier, but this is really not that much work
|
|
|
|
