Painted my rims!!!!
Login | |
|
Painted my rims!!!! - 3/26/2008 6:21:16 PM
|
|
|
EvansBlue
Posts: 2373
Joined: 7/12/2007 From: Princeton, NC, USA Status: offline
|
Just got the left sides done and I'm working on the right. I'm alternating; swapping the spare out with the one I'm working on so I can keep driving it, its taking a while to sand down and mask the wheels. I used a scotch brite pad to rough up the wheels and caps then wetsanding before and after priming. Heres the steps I'm taking: Clean tire, rim, and cap with mild degreaser Scuff with pad wetsand mask aluminum veneers, tire, rim holes(back of them), and center. wipe down with acetone prime with self-etching primer let dry wetsand paint with Ceramic caliper paint let dry wetsand again paint again let dry Clearcoat with rim clearcoat for extra brake dust resistance remove masking before clearcoat dries let dry clean up overspray with acetone (will not harm the aluminum, but will harm the new paint) Heres the pics of the right side: I had a small incident when I was getting ready to put the tire back on when my jack just gave out on me and dropped the left rear down on the rotor, but it didn't hurt anything luckily. Just goes to show that I need to use my jackstands....
_____________________________
2000 Blazer LS 1981 Z28 Camaro 1994 Toyota truck
|
|
|
|
|
|
|
|
|