2500 HD park Brake Problems
Login | |
|
2500 HD park Brake Problems - 3/26/2008 6:13:09 PM
|
|
|
Phil Speadahead
Posts: 3
Joined: 3/26/2008 Status: offline
|
Hi all, newbie here. Just about through a brake job on my 2001 2500 HD. Got three wheels done without too much grief. On the last one and the darn drum will not come off. I have slacked off the adjuster rod inside the drum,(at least it is loose when viewed through the small access hole) and still the drum will not come off. Thinking that the park brake cable is still under tension but cannot figure out haw to slacken it off. I have a manual that shows the park brake cable with a nut and bolt slack adjuster half way back , but on the truck there is no such monster. Where do you slacken the park brake cable ? At the pedal ? Also if I cannot free up the brake shoes on the park brake any suggestions on getting the drum off ? The disks have worn the rotor side down to mins so I was replacing the drum/rotors any way so I have hammered the back of the rotor/drum pretty seriously with no movement. Hope there is someone out there familiar with this problem Thanks a bunch.
_____________________________
2001 2500 HD 9.5 Jayco Camper see ya !
|
|
|
|
|
|
|
|
RE: 2500 HD park Brake Problems - 3/26/2008 7:07:31 PM
|
|
|
northey87
Posts: 868
Joined: 10/17/2007 Status: offline
|
Welcome to the forum!!! Some one should be able to help, just hang in there.
_____________________________
''''''''''''''''95 1500 Silverado, 350, flowmaster Force II exhuast, S&B CAI.
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Chevy Prices
Chevy Forums
Monte Carlo
Corvette
Camaro
Advertising Info
|
Contact Us |
Advertising |
Automotive Directory |
Archive |
About Us |
Link To Us |
Chevy Links |
Legal |
Privacy Policy |
© Chevrolet Forum
Chevrolet Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.
|