Chevy Forum   Chevy Classifieds   Photo Gallery   Chevrolet News   Search   Contact CF   Sponsors
  Member List   Forum FAQ   Chevy Timeslips   Chevy Recalls   TSBs   Calendars   Register   Login  

Coolent leak

  Printable Version
Chevrolet Forums >> Chevy Trucks, Vans & SUV's >> S-10 & Blazer >> Coolent leak Page: [1] 2   next >   >>
Login
Message << Older Topic   Newer Topic >>
Coolent leak - 3/26/2008 2:28:18 PM   
British Blazer

 

Posts: 6
Joined: 3/26/2008
Status: offline
Just got a Blazer 4.3 2001 British model, got a problem with coolent leaking from the top end of the  motor.
As you look at the block to the left it looks like the leak is between the case & the head, just behind where a braided hose enters the block. When you grab the large hose from the Radiator & pump it, it bubbles from the same gap.
Its dont seem to hold the coolent,oil is clean, oil pressure at 250 to 275 & temp at 100.
The problem only happened today & i pulled up when i spotted the steam rising from the hood in traffic.
Any ideas people, im just hope it not the head gasket.

Post #: 1
RE: Coolent leak - 3/26/2008 2:36:02 PM   
EuroGoldLS


Posts: 1962
Joined: 7/12/2007
From: Princeton, NC, USA
Status: online
EuroGoldLS's photo gallery
Assuming Celsius and N/m, I'm almost sure you have a failed intake manifold gasket.

_____________________________


VOTE for Ride Of The Month!!!


PM me for a custom sig or avatar!

(in reply to British Blazer)
Post #: 2
RE: Coolent leak - 3/26/2008 2:49:01 PM   
British Blazer

 

Posts: 6
Joined: 3/26/2008
Status: offline
I take it thats not as bad as the head gasket then?

(in reply to EuroGoldLS)
Post #: 3
RE: Coolent leak - 3/26/2008 3:26:06 PM   
EuroGoldLS


Posts: 1962
Joined: 7/12/2007
From: Princeton, NC, USA
Status: online
EuroGoldLS's photo gallery
Definately not. Intake manifold gasket failure isn't a problem you can ride around though! Park it or take it to a mechanic ASAP. You could be leaking coolant inside the engine as well.

_____________________________


VOTE for Ride Of The Month!!!


PM me for a custom sig or avatar!

(in reply to British Blazer)
Post #: 4
RE: Coolent leak - 4/20/2008 1:31:00 PM   
British Blazer

 

Posts: 6
Joined: 3/26/2008
Status: offline
Many thanks Eurogold, a spot on diagnosis.
Got the gaskets in the uk on next day delivery,only took the shop 2 weeks to get round to doing it.
Now im shoping round for an induction kit.
Once again many thanks:)

(in reply to EuroGoldLS)
Post #: 5
RE: Coolent leak - 4/20/2008 2:26:10 PM   
EuroGoldLS


Posts: 1962
Joined: 7/12/2007
From: Princeton, NC, USA
Status: online
EuroGoldLS's photo gallery
You're welcome! If you are looking for an intake, make sure you get it for the right hand drive. The American lefty has a different underhood config than the right hander.

_____________________________


VOTE for Ride Of The Month!!!


PM me for a custom sig or avatar!

(in reply to British Blazer)
Post #: 6
RE: Coolent leak - 4/23/2008 8:12:46 AM   
my99s10

 

Posts: 8
Joined: 4/3/2008
Status: offline
Just had my radiator replaced because it was losing coolent and wasn't reaching normal temp. But for the past two weeks the coolent has been low and it smells like burning antifreeze. I was thinking it was a gasket but my question was how much it would be to replace the gasket if I had to get it replaced.

(in reply to EuroGoldLS)
Post #: 7
RE: Coolent leak - 4/23/2008 10:19:59 AM   
rabbit0102030


Posts: 465
Joined: 4/3/2007
From: New Braunfels, TX
Status: offline
rabbit0102030's photo gallery
That would be difficult to say really. The best you could do for yourself is to call around to a few shops and ask for an estimate.

_____________________________


CLICK HERE and Vote in the June 2008 Ride Of The Month




(in reply to my99s10)
Post #: 8
RE: Coolent leak - 4/23/2008 1:55:59 PM   
shawnvw

 

Posts: 795
Joined: 1/18/2008
Status: online
what gasket are you referring to?

(in reply to rabbit0102030)
Post #: 9
RE: Coolent leak - 4/23/2008 6:23:19 PM   
EuroGoldLS


Posts: 1962
Joined: 7/12/2007
From: Princeton, NC, USA
Status: online
EuroGoldLS's photo gallery
I think he is referring to the intake manifold gasket.

_____________________________


VOTE for Ride Of The Month!!!


PM me for a custom sig or avatar!

(in reply to shawnvw)
Post #: 10
Login OR Register now to post a reply to this forum topic.
Page:   [1] 2   next >   >>

 
Chevrolet >> Chevy Trucks, Vans & SUV's >> S-10 & Blazer
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
zx1100f12429
biglg2166
73shark2112
eurogoldls1962
engine21707
tahoe071139
northey87847
shawnvw795
golfer610
malibumaxxss598

New Vendors
Truxedo
Pro Car Parts
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.

Chevrolet Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.