RE: '03, front brakes shot, back ones great

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

RE: '03, front brakes shot, back ones great

Printable Version

Chevrolet >> Chevy Trucks, Vans & SUV's >> Silverado >> RE: '03, front brakes shot, back ones great

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: '03, front brakes shot, back ones great - 8/23/2006 7:04:24 PM

carpenterbill

Posts: 75
Joined: 6/23/2006
Status: offline

1. It sounds like bad rotors, or a problem in the master cylinder causing the brakes to hang, or he just rides them

2. There is a huge difference between light duty and heavy duty brakes. For one the thickness of the rotors, a 1500(light duty) has thin rotors, the HD's have Huge rotors front and rear along with better calipers to put some claming force on those big rotors.

(in reply to kcb37)

Post #: 11

RE: '03, front brakes shot, back ones great - 8/23/2006 7:23:50 PM

NCHEVYHEVN

Posts: 268
Joined: 7/23/2006
Status: offline

Actually I just looked up calipers and rotors for both a 2003 Chevy Silverado 1500 4x4 and a 2003 Chevy Silverado 2500 4x4 HD and it pulled up the same part numbers.

(in reply to nitrochevy)

Post #: 12

RE: '03, front brakes shot, back ones great - 8/23/2006 7:50:00 PM

kcb37

Posts: 504
Joined: 7/3/2006
Status: offline

What kind of pads are they?

(in reply to NCHEVYHEVN)

Post #: 13

RE: '03, front brakes shot, back ones great - 8/23/2006 7:55:38 PM

NCHEVYHEVN

Posts: 268
Joined: 7/23/2006
Status: offline

quote:

ORIGINAL: kcb37

What kind of pads are they?

I didn't look up pads. Just rotors and calipers.

The factory pads are all AC Delcos

(in reply to kcb37)

Post #: 14

RE: '03, front brakes shot, back ones great - 8/23/2006 7:58:50 PM

kcb37

Posts: 504
Joined: 7/3/2006
Status: offline

Are they metalic or semi-metalic?

(in reply to NCHEVYHEVN)

Post #: 15

RE: '03, front brakes shot, back ones great - 8/23/2006 7:59:50 PM

NCHEVYHEVN

Posts: 268
Joined: 7/23/2006
Status: offline

quote:

ORIGINAL: kcb37

Are they metalic or semi-metalic?

Not sure on that one.

(in reply to kcb37)

Post #: 16

RE: '03, front brakes shot, back ones great - 8/23/2006 10:01:24 PM

carpenterbill

Posts: 75
Joined: 6/23/2006
Status: offline

quote:

ORIGINAL: NCHEVYHEVN

Actually I just looked up calipers and rotors for both a 2003 Chevy Silverado 1500 4x4 and a 2003 Chevy Silverado 2500 4x4 HD and it pulled up the same part numbers.

well you need to look again, chevys use hat rotors, a 1500 has 6 lugs the HD's have 8 lugs there is no way the same rotor will fit from one to the other, were every you looked is wrong, they cant be the same part number cause there different parts. How can you fit a rotor with 6 lug holes onto a hub that has 8 lugs?

*edit* unless you looked up a 03 1500HD Crew, that has the same brake pakage as the 2500HD's, the standard 1500 uses a different setup.

< Message edited by carpenterbill -- 8/23/2006 10:10:38 PM >

(in reply to NCHEVYHEVN)

Post #: 17

RE: '03, front brakes shot, back ones great - 8/25/2006 9:08:54 PM

KissMySS

Posts: 15
Joined: 8/25/2006
Status: offline

factory pads are ceramic type,last 100k +.....rear wear out around 60-80k....try this...pump the pedal several times,(engine off),crack a bleeder valve and see if it "spits" fluid...if it does,m/c seal is sticking and keeping pressure applied,(hope you dont have something other than brake fluid in there ?)...if it does'nt spit fluid out,possible booster issue....it it hydro-boosted or vacuum ?

(in reply to carpenterbill)

Post #: 18

RE: '03, front brakes shot, back ones great - 10/9/2006 6:15:10 PM

phoenixcorvette