Replacing Factory Nav HELP PLEAS!!!

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

Replacing Factory Nav HELP PLEAS!!!

Printable Version

Chevrolet Forums >> Chevy Trucks, Vans & SUV's >> Avalanche >> Replacing Factory Nav HELP PLEAS!!!

Page: [1]

Message

<< Older Topic Newer Topic >>

Replacing Factory Nav HELP PLEAS!!! - 3/16/2008 2:26:24 PM

Sergio_t1

Posts: 1
Joined: 3/16/2008
Status: offline

ok, im new to this forum and i would really appreciate somebodys help. I have a 07 AV with factory nav and bose, and im replacing it with a pioneer z1 i have bought the pac module that retains door chimes and onstar but im not sure what i have to do to replace the amp also, and i want to keep my rear view cam i have looked everywere but no one seems to know how to tap in to it. Can some one help me?? Thank You!!

Post #: 1

RE: Replacing Factory Nav HELP PLEAS!!! - 3/17/2008 4:57:04 PM

shawnvw

Posts: 1097
Joined: 1/18/2008
Status: offline

If you use the right pac module, you can retain the use of the factory amp. Just connect the rca's of the pac module directly to the pre-outs of the z1.

I haven't used a factory cam in an aftermarket unit before, but i don't see why you woulnd't be able to integrate it. If you connect an rca to pin 6(pink +), and pin 7(lt blu -) of connector 4(i believe its brown) then connect the rca to the camera input of the z1 you should be golden. Check the instructions of the module, but i do belive it will give you a VSS signal and also a reverse wire to make the installation go really smooth

(in reply to Sergio_t1)

Post #: 2