help w/ engine build

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

help w/ engine build

Printable Version

Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> Silverado >> help w/ engine build

Page: [1]

Message

<< Older Topic Newer Topic >>

help w/ engine build - 8/16/2006 7:40:55 PM

88c1500

Posts: 1
Joined: 8/16/2006
Status: offline

I have an 88 C1500 w/ stock 350.

I am rebuilding the motor and am going to use a 383 stroker kit. With every kit I have to specify whether I want a 1 piece rear main seal or a 2 piece...so my question is this:

Will either work w/ my stock block?
Which is better on a normal basis?

I am not building a racing engine or anything like that, it will just be a nice performing daily driver.

Post #: 1

RE: help w/ engine build - 8/16/2006 8:06:24 PM

carpenterbill

Posts: 75
Joined: 6/23/2006
Status: offline

You need the kit with the right seal, they are 2 different things and NOT interchangable. The 2-piece seal is an older designe witch is prone to leaks, the 1-piece is newer an less likly to leak. An 88 should be a one piece seal unless the engine has been swaped for an older one. You need to look into the stroker kit a little more, there is a lot of grinding you must do to the block to make the crank clear. A suggestion, get the kit with 6" rods, it does have more power potential and will not weat out the block as quickly.

< Message edited by carpenterbill -- 8/16/2006 8:11:57 PM >

(in reply to 88c1500)

Post #: 2