Fender Adjustment

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

Fender Adjustment

Printable Version

Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> Colorado >> Fender Adjustment

Page: [1]

Message

<< Older Topic Newer Topic >>

Fender Adjustment - 2/23/2008 3:40:44 PM

trex

Posts: 4
Joined: 2/22/2008
Status: offline

The passenger side front fender on my 07 Colorado looks to be slightly out of allinement with the door and hood while the drivers side looks good. Taking a quick look at the attachment points there doesn't seem to be any adjustment as the holes don't look out of round to allow movement,but I didn't loosen anything yet.It would seem that adjustment must be possible so I'm asking here if anyone can advise on how wise and difficult that task would be.

Post #: 1

RE: Fender Adjustment - 2/23/2008 8:44:56 PM

EvansBlue

Posts: 2324
Joined: 7/12/2007
From: Princeton, NC, USA
Status: offline

How did it get out of place? Most of the time, when a fender is whoppy-jawwed (as we say) it will have to be bent back out.

_____________________________

In Obama''s new Nation, you pledge with your hand over your crotch instead of your chest.

(in reply to trex)

Post #: 2

RE: Fender Adjustment - 2/23/2008 9:06:08 PM

trex

Posts: 4
Joined: 2/22/2008
Status: offline

Thanks for the reply. There was no crash or body damage done, it is something that I have noticed as I have looked over my truck in the weeks since buying it. The alignement is not real bad but something that I notice being anal that I am.And instead of making an issue of it which would take the truck for a couple days I thought I'd try to fix it myself.

(in reply to EvansBlue)

Post #: 3