Trailer Brake Controller

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

Trailer Brake Controller

Printable Version

Chevrolet >> Chevy Trucks, Vans & SUV's >> Avalanche >> Trailer Brake Controller

Page: [1]

Message

<< Older Topic Newer Topic >>

Trailer Brake Controller - 2/20/2008 6:24:31 PM

mitranom

Posts: 18
Joined: 2/20/2008
Status: offline

Hello all! I am brand new to this forum so be easy on me please.

Well I am a proud new owner of a 2008 Chevy Avalanche LTZ. I absolutly love my truck.

So today i bought a Hopkins Impulse Trailer Brake Controller. Only reason I bought this one is because my brother has it on his '06 trailblazer and my dad has it on his '01 suburban 2500 and so i guess its just tried and true. Any way, I set it up...mounted and everything, but I dont seem to get any power to the trailer brake controller. I have done a search on the site and people say it has to do with a simple connection under the hood. If this is true, assuming i did my wiring right, where would I find that important cable that gives me power to the controller?

If there is no connection under the hood what is the right connection?

I have on the controller a Red, Blue, White, and Black wire
On the Avalanche I have a Red w/black stripe, dk. Blue, lt. Blue, and White

What I connected was white to white, blue to dark blue, black to red, and red to light blue.

Thanks everyone!

Post #: 1

RE: Trailer Brake Controller - 3/5/2008 10:56:22 AM

charlie pachanga

Posts: 42
Joined: 2/17/2008
Status: offline

The red/black should have no power unless you connect it at the battery. Go to the engine conparment, look on the drivers side you will see the main fuse/relay box. Between the fuse box and fender you should see a red/black tape up take it out and connect it to the empty stud at the relay/fuse box. If you look by the brake line below where the master cylinder is you should find the other red/blk c that one also needs to be connected.

(in reply to mitranom)

Post #: 2

RE: Trailer Brake Controller - 3/5/2008 4:27:50 PM

mitranom

Posts: 18
Joined: 2/20/2008
Status: offline

Thanks for the help charlie. I will set it up this weekend.

(in reply to charlie pachanga)

Post #: 3