2000 Z71 Power window switch

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

2000 Z71 Power window switch

Printable Version

Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> Silverado >> 2000 Z71 Power window switch

Page: [1]

Message

<< Older Topic Newer Topic >>

2000 Z71 Power window switch - 8/14/2006 11:17:33 AM

3cylinder

Posts: 1
Joined: 8/14/2006
Status: offline

Drivers window will go down but not up. I bypassed and put window up at motor. Do I need to order just the drivers switch or the hole electrical board which contains both window switchs and door locks?

Post #: 1

RE: 2000 Z71 Power window switch - 8/15/2006 12:45:01 AM

NCHEVYHEVN

Posts: 268
Joined: 7/23/2006
Status: offline

It's whatever the peice comes as. I beleive it comes as one big peice with all the switches but I'm not positive.

(in reply to 3cylinder)

Post #: 2

RE: 2000 Z71 Power window switch - 9/1/2006 12:19:33 PM

Mammalian04

Posts: 2
Joined: 9/1/2006
Status: offline

I have the same issue. What did you end up doing?

(in reply to 3cylinder)

Post #: 3

RE: 2000 Z71 Power window switch - 9/1/2006 1:03:44 PM

uncle bill

Posts: 289
Joined: 8/25/2006
Status: offline

"96 Camaro Z-28 23K miles. I had to replace both window motors in less than 20,000 miles. Hope Yours is a better design.

(in reply to Mammalian04)

Post #: 4

RE: 2000 Z71 Power window switch - 9/3/2006 5:21:27 AM

Mammalian04

Posts: 2
Joined: 9/1/2006
Status: offline

I have already replaced the regulator and rails (my cable snapped on the stock setup) but now it seems I have a problem in the connection. It seems to be either the switch or the wiring harness plug that isn't making a good connection. I had this problem before and wiggling the wires seemed to do the trick. No such luck this time....

I will have to find out which wires to "jump" to manually raise the window up. If that doesn't work then my ebay replacement regulator only lasted a week.

(in reply to uncle bill)

Post #: 5