Chevy Forum   Chevy Classifieds   Photo Gallery   Chevrolet News   Search   Contact CF   Sponsors
  Member List   Forum FAQ   Chevy Timeslips   Chevy Recalls   TSBs   Calendars   Register   Login  

RE: Anyone know what 07 wheel offset is

  Printable Version
Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> Tahoe >> RE: Anyone know what 07 wheel offset is Page: <<   < prev  1 [2]
Login
Message << Older Topic   Newer Topic >>
RE: Anyone know what 07 wheel offset is - 5/10/2007 4:33:09 AM   
e

 

Posts: 399
Joined: 4/5/2007
Status: offline
ok, like the master(zx) said the stock 17's are a +31.0mm. I have 24 x 10's that are +25mm offset. Here's the trick. A +25mm will stick out past the wheel wells in the front but not on the back. We left the 25mm on the rear wheels to make them sit flush under the fender. On the front wheels we machined them down 6mm to create a +31mm. They sit we nice. CAUTION not all wheels have enough lug seat to remove 6mm, so this will not work on all wheels. If you notice chevy's have always had the front wheels sit futher outboard than the rear. We are lowering the truck as well and they should sit right at the edge of the fender lips. We went with the 295 35 24 because we heard that the 305's are a little too wide and can cause rubbing. I have not rubbed yet at all at stock height. We'll see when we drop 2/3. I am very impressed with the ride on the 24's as well. Also retained the TPMS which can run you about 50 bucks a piece at the dealer for new ones. You can reuse your old ones if your careful but you will need new stems. The dealer will try to tell you that you have to replace the sensors and stems but you can get just stems. Two dealers did this too me. I actually found that the caddy dealer was a little more up to date on these. The only draw back to running two offsets will be tire-rotations. I will have to dismount tires at the frickin time.
e

_____________________________

2007 Tahoe LT
Clifford Matrix 50.5 Security and Remote Start System
GrillCraft SW Grille Custom Installed
AllSales Chrome Front Bowtie
Removed Rear Gold Bowtie
Peripheral iPOD Intergration
WeatherTech Floor Liners
24" Giovanna DBL G 55's

(in reply to muzhik)
Post #: 11
RE: Anyone know what 07 wheel offset is - 7/16/2007 12:07:03 PM   
k15goose

 

Posts: 15
Joined: 7/16/2007
Status: offline
would it not have been easier (for balancing and no machining) to get all +31mm and put 1/4" spacers on the back two?

(in reply to e)
Post #: 12
RE: Anyone know what 07 wheel offset is - 7/18/2007 7:53:41 PM   
tahoelover

 

Posts: 5
Joined: 7/18/2007
Status: offline
Question: Will a wheel that has an offset of 15+ stick out further than the stock 31+?

(in reply to k15goose)
Post #: 13
RE: Anyone know what 07 wheel offset is - 7/18/2007 8:18:03 PM   
e

 

Posts: 399
Joined: 4/5/2007
Status: offline
quote:

ORIGINAL: k15goose

would it not have been easier (for balancing and no machining) to get all +31mm and put 1/4" spacers on the back two?

Of course, but the wheels I  have are not offered in a +31mm. "Also that would way to easy for me" as my wife would say. Also I dont like spacers.

"Question: Will a wheel that has an offset of 15+ stick out further than the stock 31+?"
Answer: YES

(in reply to k15goose)
Post #: 14
RE: Anyone know what 07 wheel offset is - 7/19/2007 7:57:00 PM   
73shark


Posts: 2314
Joined: 4/17/2006
Status: offline
73shark's photo gallery
This might help:  http://www.topbuzz.co.uk/info/offset/b001.gif

_____________________________

GM perf. exh, GM CAI, Superchips, Lund step tubes, billet grill, LED tails, Lloyd mats, rear console, GM flaps, silver calipers, black bow ties, tint

(in reply to tahoelover)
Post #: 15
RE: Anyone know what 07 wheel offset is - 9/18/2007 1:35:52 AM   
kacyk


Posts: 9
Joined: 10/29/2006
Status: offline
kacyk's photo gallery
Hello good people.  I have a 2007 Yukon XL and am about to pull the trigger on a set of Boss 313 Black Chrome 24's.  Discount Tire tells me that the the offset for my truck is 40 mm in this size Boss wheel.  Does that make sense?  I know Boss came out with a new 330 series and that only comes in 24's for the 2007 Chevy's and the offset is 40.  So I guess it makes sense but 40 seems like a lot.  Please advise.  Kacy




Thumbnail Image


Attachment (1)

(in reply to 73shark)
Post #: 16
Login OR Register now to post a reply to this forum topic.
Page:   <<   < prev  1 [2]

 
Chevrolet >> Chevy Trucks, Vans & SUV's >> Tahoe
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
zx1100f12429
evansblue2330
73shark2314
biglg2166
engine21707
shawnvw1259
tahoe071139
northey87911
malibumaxxss625
golfer610

New Vendors
Sportwing

Chevrolet Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.