1959 Impala rear end noise

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

1959 Impala rear end noise

Printable Version

Chevrolet >> Chevy Cars >> Impala >> 1959 Impala rear end noise

Page: [1]

Message

<< Older Topic Newer Topic >>

1959 Impala rear end noise - 5/30/2005 6:41:22 PM

deucegod32

Posts: 2
Joined: 5/30/2005
From: United States
Status: offline

I have a 1959 impala sport sedan with a stock rear end... three control
arms with the panhard bar. Whenever I decelerate from letting off
of the accelerator or put on the brakes I can hear a distinct thunk
sound coming from somewhere in the back of the car. I got under
the car and tried to see if I could see any bad bushings, wiggle the
driveshaft, or any of the control arms. Everything seemed rock
solid. I would like to get some opinions before I go tearing
things apart and buying parts. Thanks to whoever responds!

Post #: 1

1959 Impala rear end noise - 5/31/2005 2:40:05 PM

Patrick

Posts: 262
Joined: 3/17/2005
From: United States
Status: offline

i dont think that it would have anything to do with the diff inside. how about a body mount? if tis during deceleration, it is something caused by the vehicle weight shifting forward...

(in reply to deucegod32)

Post #: 2

1959 Impala rear end noise - 7/27/2005 6:23:55 PM

ShamrockCustoms

Posts: 1
Joined: 7/27/2005
From: United States
Status: offline

check carrier bearing. midway down driveshaft. common probs
on vintage impalas. inland empire out of california makes a great
billet replacement.

also, check u joints.

ShamrockCustoms38560.7668981481

(in reply to deucegod32)

Post #: 3

1959 Impala rear end noise - 8/4/2005 12:27:36 PM

deucegod32

Posts: 2
Joined: 5/30/2005
From: United States
Status: offline

Thanks for your input. I checked the carrier and nothing really
seemed wrong with it. The ring and pinion were nearly perfect and
the spider gears were good. I did not notice any play in the
U-joints or the hanger bearing. I plan on changing the U-joints
anyway and I will see if that cures it.... If not then the hanger
bearing.... If none of those then... well... some bushing in the rear
suspension somewhere. Thanks again for the input!

(in reply to deucegod32)

Post #: 4