Caprice Upgrade

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

Caprice Upgrade

Printable Version

Chevrolet Forum >> Past Vehicles >> Caprice >> Caprice Upgrade

Page: [1]

Message

<< Older Topic Newer Topic >>

Caprice Upgrade - 8/10/2006 9:19:09 PM

mopar

Posts: 28
Joined: 5/27/2006
Status: offline

I have a 1992 Caprice with an old 305. I would like to put a blown 327 in it, but i don't if im going to need a cross member for the frame so the chassis doesn't twist or flex. The main problem is it has a 2" drop, and i putting dual exhaust on it and that would leave much room under there for cross braces. Is there another solution?

Post #: 1

RE: Caprice Upgrade - 8/30/2006 11:28:04 AM

dragonrpc

Posts: 94
Joined: 4/4/2006
Status: offline

Mopar,

I did respond to your e-mail, sorry for the late response.

_____________________________

2007 Mercedes ML 63 /////AMG - 503HP
1983 Ranger 350V Bass Boat - 1992 Johnson 150HP
Sold 1999 Chevy S10 4X4 Blazer - 7" Trailmaster lift - 4.3
Sold 1994 Chevy S10 4X4 Extra Cab Pickup - 4.3
Sold 1967 Chevy Camero - 327

(in reply to mopar)

Post #: 2

RE: Caprice Upgrade - 8/30/2006 12:52:05 PM

kcb37

Posts: 504
Joined: 7/3/2006
Status: offline

I would cost more but if you split your pipes agian and had them flattened over the crossmember. If you have enough room. I say split it again because you will still keep most if not all of your flow over a big choke point.

(in reply to dragonrpc)

Post #: 3

RE: Caprice Upgrade - 3/11/2007 12:47:06 AM

btotheh33

Posts: 30
Joined: 2/14/2007
From: East Side B-lo
Status: offline

box the frame rails.

(in reply to kcb37)

Post #: 4