Caprice Upgrade (Full Version)

Chevrolet >> Past Vehicles >> Caprice

Caprice Upgrade

  

mopar -> Caprice Upgrade (8/10/2006 9:19:09 PM)

I have a 1992 Caprice with an old 305. I would like to put a blown 327 in it, but i don't if im going to need a cross member for the frame so the chassis doesn't twist or flex. The main problem is it has a 2" drop, and i putting dual exhaust on it and that would leave much room under there for cross braces. Is there another solution?

  
dragonrpc -> RE: Caprice Upgrade (8/30/2006 11:28:04 AM)

Mopar,

I did respond to your e-mail, sorry for the late response.

kcb37 -> RE: Caprice Upgrade (8/30/2006 12:52:05 PM)

I would cost more but if you split your pipes agian and had them flattened over the crossmember. If you have enough room. I say split it again because you will still keep most if not all of your flow over a big choke point.

btotheh33 -> RE: Caprice Upgrade (3/11/2007 12:47:06 AM)

box the frame rails.

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.