|
b6876 -> RE: How to install OEM Nav on 2007 Tahoe (10/30/2006 11:14:51 PM)
|
I have purchased my unit from ebay, installed it; very easy swap out. When I removed my old radio, there were only 2 plugs. The new nav unit had 4 plugs. I plugged in the two that fit (the two nearest the passanger side when installed), and didn't think twice about the other two (nearest the driver side, closer to the antenna plug). When I took it to the dealer for the "unlock", 2 service guys asked if I hooked up the vehicle speed sensor and other wires. I supposed that is what the other two harnesses are for. Can anyone provide additional feedback on this? The dealer said they can do the unlock, but not program it...? If they just unlock it, will it provide accurate GPS feedback? I had a Pioneer AVIC-N1 that I never connected the vehicle speed sensor wire, and it always worked fine. Just curious to know if I should continue pursuing this and have the radio unlocked, or forget about it. Oh, the dealer said they can wire the vehicle for the speed sensor and other connections. I'm getting a quote on that tomorrow. I'm sure it won't be cheap! Thanks!
|
|
|
|