04 Suburban Dash Removal

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

04 Suburban Dash Removal

Printable Version

Chevrolet Forums >> Chevy Trucks, Vans & SUV's >> Suburban >> 04 Suburban Dash Removal

Page: [1]

Message

<< Older Topic Newer Topic >>

04 Suburban Dash Removal - 1/26/2008 10:14:19 AM

hdfxrusa

Posts: 5
Joined: 11/21/2006
Status: offline

Looking to find out how to remove the dash to replace the stock radio. Any pixs or how too's would be much appreciated!
I posted this also in the audio section but thought that I would get more help from this forum.

Thanks,
HDFXRUSA

Post #: 1

RE: 04 Suburban Dash Removal - 1/28/2008 9:16:39 AM

southern slammer

Posts: 49
Joined: 5/19/2007
Status: offline

hi there,
the dash cover consist of a few screws and 2 push pins for the removal of the handbar on the passanger side. open your door on the side there are cover take them off u will see 2 screws undo them on both sides.take your air vents out on the passanger side with a flatblade screw driver nothing special just pull them out u have to reach inside there is a push pin located in there just push and pull bar outwards at the same timethis goes for both sides ok.remove your dash bezel by pull it outward there are no screws involved in removing it.When you look behind the bezel you just removed there are about 6 screws or 7mm nuts holding ur dash on ,just take em out and ur pretty much done.remove both pillars by prying them off and outwards.then u can pull forward on your dash cover to remove but dont pull too far you will have to undo the

Thumbnail Image

Attachment (1)

(in reply to hdfxrusa)

Post #: 2

RE: 04 Suburban Dash Removal - 1/28/2008 9:20:07 AM

southern slammer

Posts: 49
Joined: 5/19/2007
Status: offline

........undo the light sensors on the dash cover in the front by windshiled.here is a few pics i took for ya ok so its better to understand bu tit is quite simple to do really so dont stress it out ok.

Thumbnail Image

Attachment (1)

(in reply to southern slammer)

Post #: 3

RE: 04 Suburban Dash Removal - 1/28/2008 2:40:26 PM

hdfxrusa

Posts: 5
Joined: 11/21/2006
Status: offline

quote:

ORIGINAL: southern slammer

........undo the light sensors on the dash cover in the front by windshiled.here is a few pics i took for ya ok so its better to understand bu tit is quite simple to do really so dont stress it out ok.

Thumbnail Image

Thanks for the info! I am sure it will not be a problem.

HDFXRUSA

(in reply to southern slammer)

Post #: 4

RE: 04 Suburban Dash Removal - 1/31/2008 10:06:56 AM

hopelesssinner

Posts: 9
Joined: 1/23/2008
Status: offline

hello, i am gonna replace radio in a 02 sub. do you have remove dash cover or just dash face to replace radio? jon

(in reply to hdfxrusa)

Post #: 5

RE: 04 Suburban Dash Removal - 1/31/2008 12:29:46 PM

shawnvw

Posts: 801
Joined: 1/18/2008
Status: offline

hdfxrusa - you don't need to remove all that stuff to remove the radio.
turn the key on, put gear shifter all the way down, tilt steering wheel all the way down, and just pull off the panel srounding the radio, hvac controls and intrument cluster. then remove the 3 7mm bolts to remove radio

hopeless - your dash is exactlythe same. The only difference in removing the radio is that yours is just clipped in.

< Message edited by shawnvw -- 1/31/2008 12:35:10 PM >

(in reply to hopelesssinner)

Post #: 6

RE: 04 Suburban Dash Removal - 1/31/2008 4:11:35 PM

hopelesssinner

Posts: 9
Joined: 1/23/2008
Status: offline

shawn, thanks for reply. will change it this weekend. hopelesssinner

(in reply to shawnvw)

Post #: 7

RE: 04 Suburban Dash Removal - 2/1/2008 7:52:31 AM

hdfxrusa

Posts: 5
Joined: 11/21/2006
Status: offline

quote:

ORIGINAL: shawnvw

hdfxrusa - you don't need to remove all that stuff to remove the radio.
turn the key on, put gear shifter all the way down, tilt steering wheel all the way down, and just pull off the panel srounding the radio, hvac controls and intrument cluster. then remove the 3 7mm bolts to remove radio

Thanks shawnvw for the reply!
HDFXRUSA

(in reply to shawnvw)