hey guys, please help engine light on
Login | |
|
hey guys, please help engine light on - 12/24/2007 7:53:42 AM
|
|
|
shayandude
Posts: 29
Joined: 7/30/2007 Status: offline
|
hey guys, i was driving and the light came on , so i stopped at work, Advance auto parts, and hook the machine up i got p0171 and p0174 it says system too lean bank one, system too lean bank 2 the truck is a 02 z71 silverado 1500 ext. cab with 71,000 miles do they both go out together at the same time? is that my upstreams? truck is wanting to die, sucks gas like crazy, and jerks, like mrrrrr.... mrrrrr...... at a red light. any help is much appreciated. thank you, Shayan G.
|
|
|
|
|
|
|
|
RE: hey guys, please help engine light on - 12/25/2007 4:38:26 PM
|
|
|
10gunman
Posts: 7
Joined: 12/21/2007 Status: offline
|
When u get a lean code or a rich code it doesn't always mean that ur O2 sensor/s are bad and besides I don't think both of them would go out at the same time. u should start by remembering when was the last time u changed the fuel filter and start there, also check fuel pressure just a thaugh.
|
|
|
|
RE: hey guys, please help engine light on - 12/26/2007 8:33:23 PM
|
|
|
shayandude
Posts: 29
Joined: 7/30/2007 Status: offline
|
hey, thanks, i changed the filter, it seemed pretty heavy, so i guess it needed a changing. But the light came back on the next day. and my gas is disapearing like crazy. so i just got two 02 upstream sensors, and plugs and wires, and see if that takes care of it i sure hope so.
|
|
|
|
RE: hey guys, please help engine light on - 12/27/2007 2:06:18 PM
|
|
|
mschanha
Posts: 18
Joined: 11/16/2007 Status: offline
|
Have a 99 Silverado 130,000, went through the same thing your seeing, and doing. Replaced O2 sensors, cleaned MAF sensor with contact cleaner, but SES light still came on. Finally broke down and took it to a garage ($$$). They found that the manifold gaskets were sucking air. Morale of the story, when it comes to the SES light it could be a million things.
|
|
|
|
RE: hey guys, please help engine light on - 12/27/2007 4:29:32 PM
|
|
|
Maritime
Posts: 5
Joined: 12/27/2007 Status: offline
|
How did the mech. fix the leaky manifold gaskets. My engine light came on last winter. Cleared the code, all summer long the light never came on. First night with temp below 32 the light came on and truck idles rough until it warms up. I have heard that the manifold warps when it gets too cold. Does this sound like your truck??
|
|
|
|
RE: hey guys, please help engine light on - 12/30/2007 6:51:33 PM
|
|
|
mschanha
Posts: 18
Joined: 11/16/2007 Status: offline
|
That's exactly what my truck did last year. This year when it got cold, the light stayed on all the time. They replaced the intake manifold gaskets.
|
|
|
|
RE: hey guys, please help engine light on - 12/30/2007 7:58:01 PM
|
|
|
shayandude
Posts: 29
Joined: 7/30/2007 Status: offline
|
hey, yeah wow it runs rough when cold, ad light goes on and goes off when ever it wants. changed the 2 sensors, plugs, wires. so the intake manifold gasket is next lol thanks guys its under the aul warantee.
|
|
|
|
RE: hey guys, please help engine light on - 1/1/2008 11:52:05 AM
|
|
|
ZX1100F1
Posts: 2429
Joined: 8/1/2006 Status: offline
|
Before you go through the expense and hassle of replacing the intake manifold gasket make sure to have the injectors cleaned. I have seen several cases where the same symptoms that you describe have occurred and we were able to straighten it out by cleaning the fuel injectors. GM recommends that you use the GM UPPER ENGINE AND FUEL INJECTOR CLEANER but if you do not have access to this system then buy several (4-6) 16oz bottles of Techron Fuel System cleaner and add them to one full tank of fuel then drive untill the tank is nearly empty.
|
|
|
|
Contact Us |
Advertising |
Automotive Directory |
Archive |
About Us |
Link To Us |
Chevy Links |
Legal |
Privacy Policy |
© Chevrolet Forum
Chevrolet Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.
|