Power programmer advice

Printable Version

Chevrolet Forums >> Brand Review >> Computer & Fuel Systems >> Power programmer advice

Page: [1]

Login Message << Older Topic   Newer Topic >>

Power programmer advice - 12/5/2007 10:48:46 AM    dleonard2844 Posts: 95 Joined: 11/29/2007 Status: offline Ok, so i dont know a hellavalot about 'em. What are the best brands within a reasonable price range? I have my 94 k1500 chivy lifted for offroading (trails and mud mostly) and want to get something to do the best programming for offroading use. Any tips or advice would be appreciated. _____________________________ '94 Stepside- snatch ropes are for girls 3 in. lift, 33 in. tires, magnaflow exhaust, topdeck bed cover, onboard air (with compressor!) and a Jesus whistle hanging from the rearview! Post #: 1

RE: Power programmer advice - 12/5/2007 10:42:56 PM    Coppertop71   Posts: 33 Joined: 12/3/2007 Status: offline I think your limited to just adding a chip since your truck is too old for programers. Try this site for some research and order a free catolog http://www.summitracing.com/  You might try adding headers, with a Cat-back exhaust for so torque. This is summit by your yr and make. http://store.summitracing.com/egnsearch.asp?N=700+4294908216+4294908028+115+4294924760&SearchType=Make Cat-Back & Headers http://www.performancecenter.com/Exhaust+26+Headers?adid=free&gclid=CNrsuOuGk5ACFQU6awodpkSV_w _____________________________ '06 Silveraldo 1500, 4.8L 2X4 (Hers) '01 Silveraldo 1500, 5.3L 4X4 (His) '90 XJ Jeep Cherokee (Sons new ride) Banger12 @ buggynews.com Coppertop71 @ jeepforum.com (in reply to dleonard2844) Post #: 2

RE: Power programmer advice - 12/10/2007 6:54:39 AM    jcbst12   Posts: 58 Joined: 11/10/2007 Status: offline If you can find one cheap (like on ebay), get a Predator.  Best programmer for the buck.  Can modify the hell out of your rig.  Make sure it has been unlocked by Diablosport before buying it.  Any other questions about it PM me. (in reply to Coppertop71) Post #: 3

RE: Power programmer advice - 2/21/2008 12:24:48 PM    mudmaniac Posts: 33 Joined: 1/22/2008 Status: offline If you are still intrested try TBIChips.com He has alot of information on his site about electronics and other mods. _____________________________ MudManiac 95 Tahoe 383cu.in./350hp/425ftlbs 6" lift 16x35x16 Boggers (in reply to dleonard2844) Post #: 4

RE: Power programmer advice - 2/21/2008 8:14:14 PM    fireman526 Posts: 357 Joined: 2/3/2008 Status: offline www.troyerperformance.com will build a custom programmer for gm vehicles with obd2 ports. Contact them to build one for you. Any three programs you want based on your needs including any mods you currently have including speedo correction for tire sizes. Check em out. _____________________________ (in reply to mudmaniac) Post #: 5

RE: Power programmer advice - 2/22/2008 6:14:10 AM    mudmaniac Posts: 33 Joined: 1/22/2008 Status: offline The 94 step side will have a OBD1 _____________________________ MudManiac 95 Tahoe 383cu.in./350hp/425ftlbs 6" lift 16x35x16 Boggers (in reply to fireman526) Post #: 6

RE: Power programmer advice - 2/22/2008 6:20:37 AM    fireman526 Posts: 357 Joined: 2/3/2008 Status: offline Oh ok, I dont know much about programmers for those vehicles, sorry. _____________________________ (in reply to mudmaniac) Post #: 7

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Chevy Prices

Chevy Forums
Monte Carlo
Corvette
Camaro

Ride of the Month
May 2008
1972 Corvette Convertible

Top 10 Posters
zx1100f1 2416 biglg 2154 73shark 1973 engine2 1684 eurogoldls 1539 tahoe07 1139 northey87 717 golfer 600 shawnvw 597 malibumaxxss 595

New Vendors
GM Accessories Store
Pro Car Parts
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.