switching radios need help (Full Version)

Chevrolet Forums >> Chevy Cars >> Cobalt

switching radios need help

  

aem121401 -> switching radios need help (11/15/2007 7:04:38 PM)

I  hope someone can help me i have a 2006 chevy cobalt ls with factory cd player in it and i want to put my sony cd player amp box etc but i have know i dea how to get the factory out  ineed help with that also if someone can let me know where i can get the in dash kit that i need to put the sony in all help in this matter will be appreciated thanks allen 

  
Red07SSNA -> RE: switching radios need help (11/15/2007 8:29:33 PM)

Please note that your radio is tied into the body control module (BCM) through a GMLAN serial data link.  It is not a simple matter to add accessories or swap out radios as you may affect other systems.  Your best bet is to talk to the service manager/department at your dealership for more information about this.  I've read some horror stories about owners that tried.  I read through the 2006 Cobalt service manual to see if I could give you some help -- there is no information on adding aftermarket accessories.

engine2 -> RE: switching radios need help (11/15/2007 8:40:20 PM)

quote:

ORIGINAL: Red07SSNA

Please note that your radio is tied into the body control module (BCM) through a GMLAN serial data link.  It is not a simple matter to add accessories or swap out radios as you may affect other systems.  Your best bet is to talk to the service manager/department at your dealership for more information about this.  I've read some horror stories about owners that tried.  I read through the 2006 Cobalt service manual to see if I could give you some help -- there is no information on adding aftermarket accessories.


I agree - Get someone who knows what they are doing.

Red07SSNA -> RE: switching radios need help (11/16/2007 7:05:21 AM)

Some good information for you on cobaltss.net (good site for Cobalt owners). Read the entire thread -- you might find the answers in it.

http://www.cobaltss.net/forums/showthread.php?t=21371

Good Luck!

aem121401 -> RE: switching radios need help (11/16/2007 6:24:32 PM)

Thanks for the info i will check it out ill get with the dealership i didnt think it be that difficult being that its just a basic model car nothing fancy  thanks all

charlie pachanga -> RE: switching radios need help (2/17/2008 5:46:59 PM)

Use the correct lan bus interface, a few companies make them I mainly use metra's pieces, you should not have any issues as long as you use the correct interface.

shawnvw -> RE: switching radios need help (2/17/2008 6:42:28 PM)

exactly as charlie said...use the right parts and you won't have a problem. Plan on spending a few bucks for it.
The radio comes out by taking a plastic pry bar, popping the upper right corner of the knee bolster out, prying out the small trim piece to the left of the radio. Open the glove box, and remove the trim from about the radio. Then pry up the trim around the radio. there should be 4 7mm bolts holding the radio in

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.