switching radios need help

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

switching radios need help

Printable Version

Chevrolet >> Chevy Cars >> Cobalt >> switching radios need help

Page: [1]

Message

<< Older Topic Newer Topic >>

switching radios need help - 11/15/2007 7:04:38 PM

aem121401

Posts: 2
Joined: 11/15/2007
Status: offline

I hope someone can help me i have a 2006 chevy cobalt ls with factory cd player in it and i want to put my sony cd player amp box etc but i have know i dea how to get the factory out ineed help with that also if someone can let me know where i can get the in dash kit that i need to put the sony in all help in this matter will be appreciated thanks allen

Post #: 1

RE: switching radios need help - 11/15/2007 8:29:33 PM

Red07SSNA

Posts: 23
Joined: 11/11/2007
Status: offline

Please note that your radio is tied into the body control module (BCM) through a GMLAN serial data link. It is not a simple matter to add accessories or swap out radios as you may affect other systems. Your best bet is to talk to the service manager/department at your dealership for more information about this. I've read some horror stories about owners that tried. I read through the 2006 Cobalt service manual to see if I could give you some help -- there is no information on adding aftermarket accessories.

(in reply to aem121401)

Post #: 2

RE: switching radios need help - 11/15/2007 8:40:20 PM

engine2

Posts: 1707
Joined: 12/24/2006
Status: offline

quote:

ORIGINAL: Red07SSNA

Please note that your radio is tied into the body control module (BCM) through a GMLAN serial data link. It is not a simple matter to add accessories or swap out radios as you may affect other systems. Your best bet is to talk to the service manager/department at your dealership for more information about this. I've read some horror stories about owners that tried. I read through the 2006 Cobalt service manual to see if I could give you some help -- there is no information on adding aftermarket accessories.

I agree - Get someone who knows what they are doing.

(in reply to Red07SSNA)

Post #: 3

RE: switching radios need help - 11/16/2007 7:05:21 AM

Red07SSNA

Posts: 23
Joined: 11/11/2007
Status: offline

Some good information for you on cobaltss.net (good site for Cobalt owners). Read the entire thread -- you might find the answers in it.

http://www.cobaltss.net/forums/showthread.php?t=21371

Good Luck!

< Message edited by Red07SSNA -- 11/16/2007 7:06:12 AM >

(in reply to engine2)

Post #: 4

RE: switching radios need help - 11/16/2007 6:24:32 PM

aem121401

Posts: 2
Joined: 11/15/2007
Status: offline

Thanks for the info i will check it out ill get with the dealership i didnt think it be that difficult being that its just a basic model car nothing fancy thanks all

(in reply to Red07SSNA)

Post #: 5

RE: switching radios need help - 2/17/2008 5:46:59 PM

charlie pachanga

Posts: 116
Joined: 2/17/2008
Status: offline

Use the correct lan bus interface, a few companies make them I mainly use metra's pieces, you should not have any issues as long as you use the correct interface.

(in reply to aem121401)

Post #: 6

RE: switching radios need help - 2/17/2008 6:42:28 PM

shawnvw

Posts: 1283
Joined: 1/18/2008
Status: offline

exactly as charlie said...use the right parts and you won't have a problem. Plan on spending a few bucks for it.
The radio comes out by taking a plastic pry bar, popping the upper right corner of the knee bolster out, prying out the small trim piece to the left of the radio. Open the glove box, and remove the trim from about the radio. Then pry up the trim around the radio. there should be 4 7mm bolts holding the radio in

(in reply to charlie pachanga)

Post #: 7