replacing ignition lock cylinder (Full Version)

Chevrolet >> Past Vehicles >> Cavalier

replacing ignition lock cylinder

francis67 -> replacing ignition lock cylinder (11/13/2007 9:48:30 AM)
93 vl 2.2 -the part appears to be held in place by 2 rivets of some sort. how do i get them out? do i just try and hammer them out or drill them out? pry them out?

cctgene -> RE: replacing ignition lock cylinder (11/13/2007 11:50:26 AM)
Don't know about a 93, but what I had do to get the lock cylinder out of my son's 96 was to drill a 9/32 hole in the bottom of the lock cylinder and then take a pair of needle nose plyers and break the retainer spring.

AdderMk2 -> RE: replacing ignition lock cylinder (11/13/2007 11:21:26 PM)
those are tamper resistant bolts. you can sometimes get them out using a punch and a hammer.. I typically center punch then, and drill them out.

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.