03 malibu turn signals working intermittently
Login | |
|
03 malibu turn signals working intermittently - 10/1/2007 7:33:20 PM
|
|
|
jcastle
Posts: 1
Joined: 10/1/2007 Status: offline
|
My 03 Malibu turn signals work intermittently. None of the bulbs are burned out. The hazards work, but the blinkers do not. Can someone please tell me what could be wrong and what would it take to fix it?
|
|
|
|
|
|
|
|
RE: 03 malibu turn signals working intermittently - 10/2/2007 9:42:21 AM
|
|
|
John86
Posts: 254
Joined: 2/16/2007 Status: offline
|
sounds like ur hazard switch is bad. i'd replace that first. pretty cheap and not hard to replace.
|
|
|
|
RE: 03 malibu turn signals working intermittently - 10/3/2007 8:29:59 AM
|
|
|
MalibuMaxxSS
Posts: 598
Joined: 11/18/2006 Status: offline
|
hazard switch bad...??/ they are working, the signal swith sounds gone to me...if the hazards wok,
_____________________________
2006 Malibu Maxx SS, computer Flashed, undercar LED, Cold air intake, 18' Potenzas, Limo tint front to back 1990 YJ Lifted Locked and always muddy, posi loc, 33s TSLs, weber carb. drop tailgate...
|
|
|
|
RE: 03 malibu turn signals working intermittently - 10/4/2007 7:31:17 AM
|
|
|
golfer
Posts: 610
Joined: 10/8/2006 Status: offline
|
There was a recall campaign on GM vehicles that included Malibus for the hazard switch affecting the turn signals intermittant fault. NHTSA Campaign #: 03V327000 Manufacturer Campaign #: 03043 Make: Chevrolet Model: Malibu Year: 2001 Component: Exterior lighting:hazard flashing warning lights:switch Manufacturers Involved: General motors corp. Begin Date Of Manufacturing: 03/23/2000 End Date Of Manufacturing: 05/31/2001 Recall Type: V Potential Number Of Units Affected: 670740 Date Owner Notified By Manufacturer: 02/05/2004 Recall Initiator: Odi Manufacturer Responsible For Recall: General motors corp. Date Report Received By ODI: 08/28/2003 Date Added To File: 09/04/2003 Regulation Part #: Federal Motor Vehicle Safety Standard #: Defect Summary: Certain passenger vehicles have hazard warning switches that may experience solder joint cracking caused by rapid temperature transitions and the soldering process. if solder joint cracking occurs and results in an open circuit, the turn signals/hazard lamps become intermittent or inoperative. Consequence Summary: When the turn signals are inoperative, the driver cannot use them to signal intent to turn that could result in a crash. Corrective Action: Dealers will replace the hazard warning switch. owner notification began on february 5, 2004. owners should contact chevrolet at 1-800-630-2438, pontiac at 1-800-620-7668, or oldsmobile at 1-800-630-6537.
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Chevy Prices
Chevy Forums
Monte Carlo
Corvette
Camaro
Advertising Info
|
Contact Us |
Advertising |
Automotive Directory |
Archive |
About Us |
Link To Us |
Chevy Links |
Legal |
Privacy Policy |
© Chevrolet Forum
Chevrolet Forum .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.
|