Chev VIN Decoder (Full Version)

Chevrolet >> General Chevrolet Forums >> General Tech

Chev VIN Decoder

  

beswa -> Chev VIN Decoder (9/28/2007 8:46:28 PM)

Hi i was wondering if anyone new of a good vin decoder, or if someone knows what digit to look at to get your axle ratio
Thanks  Dave

  
astroDZak -> RE: Chev VIN Decoder (9/29/2007 2:50:54 AM)

Since I don't know what car or truck you have I would suggest asking the dealer to decode your number for you.

MalibuMaxxSS -> RE: Chev VIN Decoder (9/29/2007 12:50:35 PM)

pm me your vin and I can send you a build for it

what year, if it s a5.3 will prolly have 3.73 or 4.10..if its a 4.8 it will have 3.42 or 3.73 most likely, if its 2 wheel and a 4.8 basically 3.42..but send me the vin

caprice_coupe -> RE: Chev VIN Decoder (10/3/2007 5:07:33 PM)

Don't know what you got but sometimes they'll place a little tag from the factory that'll tell you on the rear, it may be gone or rusted off etc. Another way is to put the car in nuetral, SAFELY jack the car's rear-end up and spin the tire while looking at the driveshaft. If the driveshaft turns 3 and almost 4 times per the wheel making one complete turn, you probably have 3.73s etc... Maynot get you the EXACT number but it'll get ya close.

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.