Bench Seat to Bucket (Full Version)

Chevrolet Forums >> Chevy Trucks, Vans & SUV's >> S-10 & Blazer

Bench Seat to Bucket

  

srchn4noval -> Bench Seat to Bucket (7/2/2006 7:40:28 PM)

Does anyone know what type of bucket seats will best fit into an 1985 Chevy S-10?

  
Nomad76lj -> RE: Bench Seat to Bucket (7/3/2006 10:37:36 AM)

you can use any type of seat u want as long as you can do some minor fab work. i have seats from a toyota carola in my truck. if you dont want to do that much work just find some nice seats from a corsica or sumthing. they will line up with the seat monts on the outside you just have to bolt them in the middle.

kcb37 -> RE: Bench Seat to Bucket (7/3/2006 8:09:10 PM)

Do you have a regular cab? If you find seats out of a I think a 92 maybe 93 or older cab and a half they should bolt right up.

srchn4noval -> RE: Bench Seat to Bucket (7/5/2006 3:32:04 AM)

Yes, i do have a regular cab. I was hoping to get away with as little fab work as possible. Thanks for the posts.

NCHEVYHEVN -> RE: Bench Seat to Bucket (7/23/2006 1:57:34 PM)

Some of the popular ones would be cavalier seats, factory s-10 buckets especially if you can find leather/power/heated ones from a blazer somewhere.

When it comes to actually mounting them though your gonna need the tracks from the seats. If their s10 ones then the outer holes will line up but the inner ones your gonna need to drill new holes through the floor. You gonna need some galvanized bolts, nuts, and large washers to keep from the bolts pulling through the floor. It's also really important to make sure you got a solid floor and it's not rotted out.

Good luck though.

99s10myke -> RE: Bench Seat to Bucket (4/8/2008 9:00:03 PM)

does 90 model chevy blazer seats fit a 1999 single cab s10 with no fabrication or very little

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.