72 Blazer. Need wiring color order for steering column harness (Full Version)

Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> K5 Blazer

72 Blazer. Need wiring color order for steering column harness

  

jeffwsi -> 72 Blazer. Need wiring color order for steering column harness (8/12/2007 1:19:16 AM)

Hello,

I screwed up. Seeking help.

I am installing a replacement wiring harness from Painless Wiring. Part of the process is taking the existing wire harness connector on the steering column and removing the wires then using the connector housing on the new harness. I removed the wires from the existing connector without recording which colors were in which positions. I am hoping someone here can lend a hand.

I am seeking the wiring diagram (colors, order) for the half moon connector that connects the cab side main wire harness to the steering column. The wire harness side of the connector. The sterring column side goes to the turn signal switch, horn, hazard, etc. The side I need is the one going to the fuse block. The colors are not the same on both sides of the connectors when mated

Can someone post a picture of their existing steering column connection so I could use it to rewire mine?

Thanks!

Jeff

  
kcb37 -> RE: 72 Blazer. Need wiring color order for steering column harness (8/12/2007 12:20:41 PM)

If you get a repair manual it will have a wiring diagram in it.

jeffwsi -> RE: 72 Blazer. Need wiring color order for steering column harness (8/12/2007 2:08:13 PM)

I have two repair manuals, Chilton and Haynes. Neither show the actual wire colors for that connection.

I was hoping someone might post a picture of their steering column wire harness (properly wired).

golfer -> RE: 72 Blazer. Need wiring color order for steering column harness (8/12/2007 5:30:21 PM)

Well according to my Haynes manual it shows the wire connections as follows :

Side 1                                                     Side 2 ( mating side )

B                                                                 B
LBL                                                             B/LBL
LBL
DBL                                                             DBL
DBL
BRN                                                             BRN
PPL                                                              PPL
Y                                                                   B/Y
DG                                                                DG
W                                                                  B/W

In that order and with the connector as shown in your picture ( with the wires next to it ) starting from top down. The two LBL get joined together at the same point and the two DBL do the same thing. 

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.