What do i do?

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

What do i do?

Printable Version

Chevrolet >> Chevy Trucks, Vans & SUV's >> Silverado >> What do i do?

Page: [1]

Message

<< Older Topic Newer Topic >>

What do i do? - 6/1/2006 4:34:08 PM

Azrielstear

Posts: 1
Joined: 6/1/2006
Status: offline

Ok so i have a 2005 Silverado, and i bought a new gauge face and new needles to match. So i take off the dash and the gauge cluster get it all apart and put the new face on. I decided to test fit the new needles to see how they looked before putting it all together. I put the Speedo and RPM needles on and then proceded to take them off. The speedo came off just fine but the RPM got stuck so after some tugging I found out the the needle was stuck to the servo rod. So after tugging a lot more the needle snapped out of the shaft, what i mean is that the middle of the needle hub was ripped out. Then i just decided not to worry about it, but it turned out that the whole servo had come out of the board. Long story short do i need to buy a whole new cluster or can i get a replacement servo that i can put in?