Replaced fuel pump, now what?
Login  | |
|
Replaced fuel pump, now what? - 6/22/2007 9:04:08 PM
|
|
|
TravisJL
Posts: 3
Joined: 6/22/2007
Status: offline
|
So, I have a 2000 Z with the 5.3. I ran the truck out of gas like a dipshit and had to replace the fuel pump. I yanked the bed off, replaced the pump with a new one ($300, REDICULOUS). I went ahead and changed the relay/fuse and filter while I was wrenching. Now the pump won't pump. It is the second brand new pump I put in her. I had the same problem with the 1st pump I bought and assumed the pump to be faulty. I bought a multimeter only to find that I'm not getting power to the pump. I can't figure out why. Any suggestions? I've tried "reseting" the sytem by disconnecting the neg. battery cable for some time, then reconnecting it.
|
|
|
|
|
|
|
|
|
RE: Replaced fuel pump, now what? - 6/23/2007 5:20:22 AM
|
|
|
golfer
Posts: 610
Joined: 10/8/2006
Status: offline
|
You might have to start tracinig the wiring for open ,shorted , or corroded wiring Check the fuse as well..
|
|
|
|
|
Printable Version
