wiper motor removal (Full Version)

Chevrolet Forums >> Chevy Trucks, Vans & SUV's >> Silverado

wiper motor removal

  

97chevguy -> wiper motor removal (5/22/2007 9:35:14 AM)

hey guys im having a hell of a time trying to remove the wiper motor on my 97 silverado i cant get the wiper arm linkage to stop rotating so i can get the last nut off the motor any helpful tips on how i can get it?

thanks

  
cb1 -> RE: wiper motor removal (5/23/2007 6:10:38 PM)

just curious, why are you changing it? I had a recall on my 95. There may be one on yours. There was something wrong with the circuit soldering causing it to  stop running durning use.
thanks

RonH -> RE: wiper motor removal (5/24/2007 7:25:16 AM)

Which nut are you trying to remove?  If it's the one holding the crank arm onto the motor, it should not be removed.  Here's the procedure for removing the motor unit:

    Remove the wiper arms.
    Remove the air inlet grille panel.
    Disconnect the electrical connector from the motor.


    Important          Do not remove the crank arm.

    Loosen the nuts attaching the drive link brackets to the crank arm.
    Remove the brackets from the wiper motor crank arm.
    Remove the three bolts and the wiper motor from the vehicle.

lost_in_alabama -> RE: wiper motor removal (5/24/2007 12:35:09 PM)

If the thing just quit working, the it is probably the circuit board.  No need to remove the entire thing.

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.