Torx Size for Changing brakes....

Printable Version

Chevrolet Forums >> Chevy Trucks, Vans & SUV's >> Suburban >> Torx Size for Changing brakes....

Page: [1]

Login Message << Older Topic   Newer Topic >>

Torx Size for Changing brakes.... - 4/30/2007 5:12:56 PM    st8itstr8   Posts: 1 Joined: 4/30/2007 Status: offline I have an '04 Chevy Suburban that I am needing to change the brake pads on. I went to do it the other day and found that it has a Torx head bolt holding the caliper on. I don't run across Torx heads much and I only do the simple things, oil, brake pads etc. on my vehicles. I really don't want to spend $20 on a Torx head set only to find that the 7pcs don't include the right size, plus I would rather just buy the one that I need to do this job specifically. So the question is what size of Torx head wrench do I need to get to fit this? Does anyone know? Thanks Post #: 1

RE: Torx Size for Changing brakes.... - 5/9/2007 9:03:04 PM    Fireguy8   Posts: 60 Joined: 4/26/2007 Status: offline It`s a 55 If I recall. (in reply to st8itstr8) Post #: 2

RE: Torx Size for Changing brakes.... - 5/19/2007 2:21:58 PM    southern slammer Posts: 49 Joined: 5/19/2007 Status: offline T55 is the right torx bit for the brake caliper.[IMG]http://i14.tinypic.com/5y8whhz.jpg[/IMG] flawdafred (in reply to st8itstr8) Post #: 3

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Chevy Prices

Chevy Forums
Monte Carlo
Corvette
Camaro

Top 10 Posters
zx1100f1 2429 biglg 2166 73shark 2135 eurogoldls 2022 engine2 1707 tahoe07 1139 northey87 854 shawnvw 826 golfer 610 malibumaxxss 598

New Vendors
Truxedo
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.