OIL IN OVERFLOW...INTAKE GASKET?

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

OIL IN OVERFLOW...INTAKE GASKET?

Printable Version

Chevrolet >> Chevy Trucks, Vans & SUV's >> Venture >> OIL IN OVERFLOW...INTAKE GASKET?

Page: [1]

Message

<< Older Topic Newer Topic >>

OIL IN OVERFLOW...INTAKE GASKET? - 4/1/2007 1:13:11 PM

98greenventure

Posts: 4
Joined: 4/1/2007
Status: offline

I have a 98 Chevy Venture and heard nightmares about the intake gaskets and headgaskets going bad. My heat sensor in the car doesn't work either. I have notice I have to add coolant all the time and there is either oil or dirty coolant inside. This is a 3.4 engine. Do I need to replace the intake gaskets? I have replaced the water pump already. If I have to replace the intake gasket, how hard is this? What are the torque specs? Any tips?

Jason

Post #: 1

RE: OIL IN OVERFLOW...INTAKE GASKET? - 7/27/2007 1:58:11 PM

asniff08

Posts: 2
Joined: 7/27/2007
Status: offline

i had what appeared to be oil in my coolant resovoir for the 3.4l but it turns out it was mold that grew inside that looked like oil, you might have the same problem, i ended up having to flush the cooling sytem b/c it was so black from this mold

(in reply to 98greenventure)

Post #: 2

RE: OIL IN OVERFLOW...INTAKE GASKET? - 7/27/2007 8:28:15 PM

golfer

Posts: 610
Joined: 10/8/2006
Status: offline

quote:

i ended up having to flush the cooling sytem b/c it was so black from this mold

Mold than lives in antifreeze ??? That's scary.

quote:

I have notice I have to add coolant all the time and there is either oil or dirty coolant inside.

If it were oil it would be cream colored scum. If the head gasket was gone you could see bubbles in the coolant usually caused by the exhaust stroke from the cylinder.

(in reply to asniff08)

Post #: 3