cant seem to get brake pressure

Printable Version

Chevrolet Forum >> Chevy Trucks, Vans & SUV's >> Suburban >> cant seem to get brake pressure

Page: [1]

Login Message << Older Topic   Newer Topic >>

cant seem to get brake pressure - 2/17/2007 7:49:00 PM    jw   Posts: 1 Joined: 2/17/2007 Status: offline I have a 97 burbon and I cannot seem to get any brake pressure. I installed a new booster, new master cylinder, new shoes on the rear and have blead all breaks through out. After this I still had no pressure so I replaced the master cylinder with a new one, not a refurbished one like the first and I still have no pressure. I also bench blead the m. cylinder before installation. What in the world could I do to get this problem fixed? Post #: 1

RE: cant seem to get brake pressure - 2/17/2007 11:26:07 PM    golfer   Posts: 610 Joined: 10/8/2006 Status: offline There is a check valve in the vacum hose to the booster... it may be faulty. (in reply to jw) Post #: 2

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Chevy Prices

Chevy Forums
Monte Carlo
Corvette
Camaro

Top 10 Posters
zx1100f1 2429 73shark 2206 biglg 2166 eurogoldls 2101 engine2 1707 tahoe07 1139 shawnvw 983 northey87 866 golfer 610 malibumaxxss 598

New Vendors
K&N Engineering, Inc.