lowering s-10 blazer (Full Version)

Chevrolet Forums >> Brand Review >> Suspension

lowering s-10 blazer

  

jagblazer01 -> lowering s-10 blazer (2/22/2006 11:02:12 PM)

I have a 2001 s-10 blazer 4x4 and i want to lower it. Who makes a good lowering kit for my truck. Im looking to lower it 4"

  
NCHEVYHEVN -> RE: lowering s-10 blazer (7/24/2006 6:10:01 PM)

This is a really old thread but incase anyone wanted to know or if you still wanted to know then here you go.

I beleive on the 4wd that beltech makes drop keys. I don't know if thier any good or not but I think you can get 2 or 3 inches from that. That last inch or two is going to have to come from cranking the torsion bars.

For the rear you get a 4'' block or you can combine a 1'' block with a 3'' lowering leaf springs.

shnormo -> RE: lowering s-10 blazer (2/11/2007 9:55:15 PM)

You're going to have to notch out your frame if you want to go that low.  you're also going to have to adjust your drive shaft pinion angles.

  

Page: [1]

Return to Chevrolet Forum home page or view the Full Version of this page.