DRL Module location

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

DRL Module location

Printable Version

Chevrolet Forums >> General Chevrolet Forums >> General Tech >> DRL Module location

Page: [1]

Message

<< Older Topic Newer Topic >>

DRL Module location - 2/3/2006 9:51:33 PM

bud1tig2

Posts: 5
Joined: 2/3/2006
Status: offline

I have a replacement DRL (Daytime running lights) module, small circuit board with a few components. Does anyone know where I can locate the module on a 96 Tahoe 2Dr/4wd. The electrical diagram in the Hayes manual is great for diagnosing the problem, but gives no info on location and tracing wires is impossible since they are all taped up.

GM part # 12135174

Post #: 1

RE: DRL Module location - 2/4/2006 3:32:14 PM

Medic2891

Posts: 69
Joined: 1/31/2006
Status: offline

About the best thing that I can recommend for this unless someone knows, is to call the dealer or go to the parts department. Usually they have the schematics available for you to look at. The other option is to check on www.mygmlink.com, there they have the owner manuals that you can look at online, and that might offer you some better information in regards to locating the module. I know this doesn't answer your question but I hope that it helps.

_____________________________

(in reply to bud1tig2)

Post #: 2

RE: DRL Module location - 2/5/2006 7:38:00 PM

bud1tig2

Posts: 5
Joined: 2/3/2006
Status: offline

I finally found the module location. It was a gray plastic box wrapped with the large wire harness. Once I removed the tape around the harness I found the box and there is an opening on the top with wires on the bottom. Once you open the top, the module can be pulled out with pliers and the new one went right in. DRL now working again.

(in reply to Medic2891)

Post #: 3

RE: DRL Module location - 2/6/2006 3:47:17 PM

Medic2891

Posts: 69
Joined: 1/31/2006
Status: offline

Thanks for the update. Always good to help fellow board members.

_____________________________

(in reply to bud1tig2)

Post #: 4