FOR SALE Very Built 408ci SBC & NX GEMINI QUAD NITROUS KIT

Chevy Forum Chevy Classifieds Photo Gallery Chevrolet News Search Contact CF Sponsors
Member List Forum FAQ Chevy Timeslips Chevy Recalls TSBs Calendars Register Login

FOR SALE Very Built 408ci SBC & NX GEMINI QUAD NITROUS KIT

Printable Version

Chevrolet Forum >> Chevrolet Classifieds >> PRIVATE For Sale / Trade Classifieds >> FOR SALE Very Built 408ci SBC & NX GEMINI QUAD NITROUS KIT

Page: [1]

Message

<< Older Topic Newer Topic >>

FOR SALE Very Built 408ci SBC & NX GEMINI QUAD NITROUS KIT - 1/15/2006 2:15:43 AM

red408malibu

Posts: 1
Joined: 1/15/2006
Status: offline

I'm selling the motor that I had in my 79 Malibu I have just freshend it up with new J&E rings, 77 race bearings, new Cometic head gaskets, and new ARP head bolts.

This motor made 406rwhp with like 436ft.lb.tq. on motor and on 2 stages of nitrous it made 627rwhp with 738ft.lb.tq. This motor went a 10.11@135mph in a 3400-3500lb Malibu.

It has alot of high dollar parts in it and is an awesome motor. Here is the list of the parts in it and what all will be included in the sale.

-"509" 400 block bored.040"w/ deck plates, has Steel splayed caps, ARP main studs, freshly decked, linebored, magna fluxed, and sonic checked. (has had a sleeve installed in the #4 cylinder due to a small crack at the top of the cylinder by the head bolt hole)
- Callies "Stealth" Racemaster Crankshaft mains .010" and rods.020" (internally balanced like 350ci)
- Clevite 77 Race rod, main and cam bearings
- ATI Super Dampner
- Hayes SFI approved flexplate
- Eagle ESP 3-D H-Beams connecting rods with arp bolts
- SRP -21cc dish forged pistons (9.8:1)
- J&E file fit rings
- Moroso high volume oil pump
- ARP oil pump shaft
- Moroso 7qt oil pan
- Comp Cams solid roller Xtreme Energy XR280R (242-248) (.570-.576) @.050"
- Cloyes Hex-A-Just timing set
- Crower roller lifters
- Comp cams Magnum series pushrods
- Fully ported Edelbrock Victor Jr. Aluminum heads
- Cometic Head gaskets
- ARP head bolts
- Comp Cams "Red" 1.6 roller rocker arms
- Comp Cams "Red" Rocker stud Girdles
- cast aluminum "Chevrolet" tall valve covers
- Edelbrock Victor Jr. intake
- polished aluminum timing cover w/ nylon cam button
- AED 850HP Carb
- MSD Pro-billet distributor w/ wires & NGK -8 plugs
- CSR High torque mini starter
- Pro-Flo Aluminum electric water pump
- custom low mount alternator bracket w/ 100amp 1 wire alternator
- 2 stage NX Gemini Quad nitrous plate Kit with an Autometer nitrous pressure guage, micro-switch, 1 10lb NX Bottle, 6 an feed line, bottle brackets, an MSD timing control set-up. The NX kit new is $1100.00 alone.

I think that about covers it. I'm looking to get $5700 Firm for the whole set up. If someone wants the motor without the nitrous set-up I'll take $5000 for the complete engine.

You cannot build this motor for $10,000. There is over $4000 alone in the rotating assembly of this motor. All you have to do is drop it in your car and ride. If anyone is interested or has any questions feel free to PM me or call me at 910-330-3081 and maybe we can work something out.

Dyno sheets where I ran the Malibu on the chassis dyno at Wayne's Dyno is Avaliable!